|
Calibration Kits
Calibration kits offer the most convenient and compact solutions available
for carrying everything you need for field pressure calibration work.All
calibration kits start with an extremely rugged carry case, manufactured
from high grade ABS plastic, and designed to withstand a drop of up to
2 meters (6 feet). The case is fully sealed and water tight, with a pressure
equalization valve to allow easy opening after changes in altitude or
temperature. A rigid, die-cut foam insert is custom designed to fit everything
you need into the most compact space possible. Your calibrator, pump,
fittings, hoses, leads, pipe thread tape, battery, and bottle of hydraulic
fluid (if required) fit snugly into precut locations
Low Pressure and Vacuum Hand pumps
CylinderPump - See how it works!
This is the ideal pressure source for calibration of low pressure differential
transmitters. It works like a bicycle pump, but with a fine adjustment
piston that makes it easy to set the pressure very precisely. On the
side of the pump is a vent valve, also designed for precise control,
so you can open it very slowly and easily control the rate of change
of pressure. Another valve changes the cylinder hand pump into a vacuum
pump, expanding the usefulness of the pump. This is an all metal pump
and is field rebuildable.
Medium Pressure and Vacuum Hand pumps
Combo Pump - See how it works!
The Combo Pump is our best selling pump because its so versatile. You
can use it for low differential pressure transmitters but it can generate
up to 500 PSI/ 35 bar/ 3.5 MPa, and its a vacuum pump, too! The unique
pressure balanced variable volume lets you set pressure precisely and
easily, even at maximum pressure. Mount a gauge or a calibrator on one
of the two pressure ports and use the second port for the device being
tested. The result is a complete field pressure calibration system that
can be operated with one hand.
High Pressure Hand pump
HydraulicPump - See how it works!
The Hydraulic Pump is a lightweight, high pressure source that can use
oil or water as the test fluid, and produces up to 5000 PSI/ 350 bar/
35 MPa. There are two pressure ports on the pump: Mount a gauge or calibrator
directly to the front of the pump, connect the spare port directly to
the device being tested, and you have a complete field pressure calibration
system. A hose, and fittings are included along with a convenient plastic
bottle to hold your hydraulic test fluid. The built-in variable volume
provides a way to set the pressure precisely, and the pump is rebuildable.
Two versions of the pump are available with maximum pressure ratings
of 3000 PSI/ 200 bar/ 20 MPa or 5000 PSI/ 350 bar/ 35 MPa.
Click here for cataloge
BACK
|
